Rockwell ShopSeries RC3031K, Руководство пользователя

Страница: 6 / 24

4.5A HAND DRILL ENG
6
- WHEN SERVICING A TOOL, USE ONLY IDENTICAL
REPLACEMENT PARTS. FOLLOW INSTRUCTIONS IN
THE MAINTENANCE SECTION OF THIS MANUAL. Use of
unauthorized parts or failure to follow Maintenance
Instructions may create a risk of electric shock or
injury.
ADDITIONAL SAFETY RULES - FOR
DRILLS
WARNING! FAILURE TO FOLLOW THESE RULES MAY
RESULT IN SERIOUS PERSONAL INJURY.
1. HOLD TOOL BY INSULATED GRIPPING SURFACES
WHEN PERFORMING AN OPERATION WHERE THE
CUTTING TOOLS MAY CONTACT HIDDEN WIRING OR
ITS OWN CORD. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock
the operator.
2. ALWAYS WEAR EAR PROTECTORS WITH HAND DRILL.
Exposure to noise can cause hearing loss.
3. ALWAYS WEAR EYE PROTECTORS WHEN USING
TOOL. USE A DUST MASK OR RESPIRATOR FOR
APPLICATIONS WHICH GENERATE DUST.
4. ALWAYS CHECK WALLS AND CEILING TO AVOID
HIDDEN POWER CABLES AND PIPES.
5. DO NOT START THE DRILL WITH THE CHUCK KEY IN
THE CHUCK.
6. MAKE SURE THE POWER SWITCH IS NOT “ON” BEFORE
YOU PLUG THE TOOL IN. Accidental start-ups could
cause injury.
7. MAKE SURE DRILL BITS ARE TIGHTENED SECURELY IN
THE CHUCK.
8. DO NOT USE DAMAGED OR WORN DRILL BITS. Dull or
damaged bits have a greater tendency to bind in
the work-piece.
9. USE CLAMPS OR A VISE TO HOLD WORK-PIECE
WHENEVER POSSIBLE.
10. SECURE MATERIAL BEFORE CUTTING. NEVER HOLD IT
IN YOUR HAND OR ACROSS YOUR LEGS.
11. SAVE THESE INSTRUCTIONS. Refer to them
frequently and use them to instruct others who
may use this tool. If someone borrows this tool,
make sure they have these instructions.
WARNING! SOME DUST CREATED BY POWER
SANDING, SAWING, GRINDING, DRILLING AND OTHER
CONSTRUCTION ACTIVITIES CONTAINS CHEMICALS
KNOWN TO CAUSE CANCER, BIRTH DEFECTS OR
OTHER REPRODUCTIVE HARM. Some examples of
these chemicals are:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and
other masonry products
• Arsenic and chromium from chemically-treated
lumber
Your risk to these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals:
• Work in a well ventilated area
• Work with approved safety equipment, such as
those dust masks that are specifically designed
to filter out microscopic particles.
THE LABEL ON YOUR TOOL MAY INCLUDE THE FOLLOWING
SYMBOLS
V ---------------------- Volts
A ---------------------- Amperes
Hz -------------------- Hertz
n
0
-------------------- No load speed
~ ---------------------- Alternating current
-------------------- Class II construction / Double
insulation
RC3031K PDN500AU 060427.indd 6 2006-7-19 16:32:07