Rockwell Automation Allen-Bradley PanelView 5510 Series, Руководство пользователя

Страница: 7 / 112

Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019 7
Preface
This manual describes how to install, configure, operate, and troubleshoot the
PanelView™ 5510 terminals. This manual does not provide procedures on how to
create applications that run on the terminals, or ladder logic that runs in the
controller.
Other tasks that you must do include:
• Configure the Ethernet settings and update the firmware of the terminal.
• Create a project by using the Studio 5000 View Designer® application.
• Create control logic for the controller by using the Studio 5000 Logix
Designer® application.
Summary of Changes This manual contains new and updated information as indicated in the following
table.
Package Contents The PanelView 5510 terminals ship with these items.
IMPORTANT You must configure the Ethernet settings and update the firmware
before you can download a View Designer project and use the
terminal. See
Initial Startup on page 37 .
Topic Page
Converted content in Package Contents section into a table. 7
Increased the maximum number of Logix-based alarms to 4,000. 11
Added footnotes 1 and 2. 11
Increased user RAM from 250 MB to 1 GB in Product Selection table. 17
Added Table 6, and paragraphs underneath table about Secure Digital (SD) cards. 18
Added Installation Precautions title and introductory sentence. 20
Added Environment and Enclosure Information subtitle. 20
Added Wiring and Safety Guidelines subtitle. 21
Added Outdoor Installation Recommendations subsection. 21
Added cross reference to second sentence of Install an SD Card section. 77
Added Accessories and Replacement Parts section. 79
Added Voltage Precautions section. 79
Added Electrostatic Discharge Precautions section. 80
Added Dispose of the Terminal section.
Item Description
Hardware • Mounting levers for panel installation
• Removable DC power terminal block
Documents • PanelView 5510 Terminals Product Information, publication 2715P-PC001
• Cutout Templates for PanelView 5510 Terminals, publication 2715P-DS001