Rockford Systems, LLC
1-800-922-7533 (U.S.A. only)
5
WARRANTY
Rockford Systems, LLC warrants that this product will be free from defects in material and workmanship for a period of 12 months from the date of
shipment thereof. ROCKFORD SYSTEMS LLC’S OBLIGATION UNDER THIS WARRANTY IS EXPRESSLY AND EXCLUSIVELY LIMITED to repairing or replacing
such products which are returned to it within the warranty period with shipping charges prepaid and which will be disclosed as defective upon
examination by Rockford Systems, LLC. This warranty will not apply to any product which will have been subject to misuse, negligence, accident,
restriction and use not in accordance with Rockford Systems, LLC’s instructions or which will have been altered or repaired by persons other than the
authorized agent or employees of Rockford Systems, LLC. Rockford Systems, LLC’s warranties as to any component part is expressly limited to that of
the manufacturer of the component part.
LIMITATION OF LIABILITY
Under no circumstances, including any claim of negligence, strict liability,
or otherwise, shall Rockford Systems, LLC be liable for any incidental or
consequential damages, or any loss or damage resulting from a defect in
the product of Rockford Systems, LLC.
WARRANTY, DISCLAIMER AND LIMITATION OF LIABILITY
NATIONAL SAFETY COUNCIL SAFETY MANUALS AND
DATA SHEETS
Other good references for safety on machine tools are the
National Safety Council’s Safety Manuals and Data Sheets. These
manuals and data sheets are written by various committees
including the Power Press, Forging and Fabricating Executive
Committee. The following publications are available for all types
of machines:
MANUALS
Power Press Safety Manual - 4th Edition
Safeguarding Concept Illustrations - 6th Edition
Forging Safety Manual
DATA SHEETS
Bench and Pedestal Grinding Wheel Operations 1
2304-0705
Boring Mills, Horizontal Metal 12304-0269
Boring Mills, Vertical 12304-0347
Coated Abrasives 12304-0452
Cold Shearing Billets and Bars in the Forging Industry
12304-0739
Degreasing (Liquid), Small Metal Parts 12304-0537
Dies, Setup and Removal of Forging Hammer
12304-0716
Drill Presses, Metalworking 12304-0335
Drills, Portable Reamer 12304-0497
Drop Hammers, Steam 12304-0720
Electrical Controls for Mechanical Power Presses
12304-0624
Forging Hammer Dies, Setup and Removal of 12304-0716
Forging Presses, Mechanical 12304-0728
Gear-Hobbing Machines 12304-0362
Handling Materials in the Forging Industry 12304-0551
Kick (Foot) Presses 12304-0363
Lathes, Engine 12304-0264
DISCLAIMER
The foregoing Warranty is made in lieu of all other warranties, expressed
or implied, and of all other liabilities and obligations on the part of
Rockford Systems, LLC, including any liability for negligence, strict
liability, or otherwise, and any implied warranty of merchantability or
fitness for a particular purpose is expressly disclaimed.
Milling Machines, Metalworking 12304-0364
Planers, Metal 12304-0383
Power Press (Mechanical) Point-of-Operation
Safeguarding, Concepts of 12304-0710
Power Press Point-of-Operation
Safeguarding: Two-Hand Control and
Two-Hand Tripping Devices 12304-0714
Power Press Point-of-Operation Safeguarding: Type A
and B Movable Barrier Devices 12304-0712
Power Press Point-of-Operation Safeguarding:
Point-of-Operation Guards 12304-0715
Power Press Point-of-Operation Safeguarding:
Presence Sensing Devices 12304-0711
Power Press Point-of-Operation Safeguarding:
Pullbacks and Restraint Devices 12304-0713
Power Presses (Mechanical), Inspection and
Maintenance of 12304-0603
Power Presses (Mechanical), Removing Piece parts
from Dies in 12304-0534
Power Press, Setting Up and Removing Dies
12304-0211 Press Brakes 12304-0419
Robots 12304-0717
Saws, Metal (Cold Working) 12304-0584
Shapers, Metal 12304-0216
Shears, Alligator 12304-0213
Shears, Squaring, Metal 12304-0328
Upsetters, 12304-0721
These manuals and data sheets can be purchased by contacting:
National Safety Council, 1121 Spring Lake Drive
Itasca, IL 60143-3201, (630) 285-1121
For additional safety information and assistance in devising,
implementing or revising your safety program, please contact
the machine manufacturer, your state and local safety councils,
insurance carriers, national trade associations and your state’s
occupational safety and health administration.
SECTION 1—IN GENERAL
Stop-Time Measurement Device
