Rockford Systems, LLC
1-800-922-7533 (U.S.A. only)
21
(Continued on next page.)
Press
ENTER
to go into the submenu.
TF TEST STROKE
The display reads:
TF TEST STROKE DATA TO PC
Press
ENTER
to perform the test stroke.
Press
▼
to go to the next setting.
TF ACTUATOR TEST
The display reads:
TF ACTUATOR TEST FEEDBACK CONTROL
Press
ENTER
.
The display reads:
TF ACTUATOR TEST START. . . .
The display automatically reads:
TF ACTUATOR TEST DELAY XXX MS.
(XXX = the displayed delay time)
Press
▼
twice to go to the next setting.
TF BATT. DRAIN & CHARGE
The display reads:
TF BATT. DRAIN & CHARGE POWER OFF
Plug the wall transformer into a 120V duplex outlet and
the other end into the power port on the meter. Press
ENTER
to shut down the meter.
The display reads:
POWER OFF. . .
The device shuts down automatically and begins the
recharging process.
OR
Press
▼
to go to the next setting.
TF DEFAULT SETTINGS
The display reads:
TF DEFAULT SETTINGS
Press
ENTER
to access default settings. The display
reads:
TF DEFAULT SETTINGS? NO
Use the
▲
or
▼
buttons to toggle between
NO
and
YES.
To choose
NO
, press
ENTER
when it is displayed. The
display reads:
TF DEFAULT SETTINGS
Press
▼
to go to the next setting (see
TF QUIT
below).
To choose
YES
and return to factory settings, press
ENTER
when it is displayed. The display briefly reads:
TF DEFAULT CARRIED OUT
The display automatically returns to the start-up menu.
Press
▼
to go to the next
MM
setting that requires
programming or go to the
MM STOP-TIME
MEASURING
program to do a test.
TF QUIT
The display reads:
TF QUIT
Press
ENTER
to quit the Test Function submenu and
return to MM
TEST FUNCTION AND SERVICE.
Press the
▲
or
▼
buttons to go to the next MM setting
that requires programming or go to the
MM STOP-TIME
MEASURING
program to do a test.
MM TEST FUNCTION
AND SERVICE
SECTION 5—PROGRAMMING
Stop-Time Measurement Device
