Rockford Systems, LLC
1-800-922-7533 (U.S.A. only)
22
(Continued on next page.)
Press
ENTER
to go into the submenu.
DM PRINT DATA
The display reads:
DM PRINT DATA FROM MEMORY
Press
ENTER
The display reads:
MEASURING 001
ID– – – – – – – –
Press
ENTER
The display reads:
MEASURING 001
WAIT 045S
The headings will print as the seconds count down to 0.
When the headings are finished printing, the display reads:
DM PRINT DATA FROM MEMORY
The measurement results will automatically print.
Press
▼
to go to the next setting.
If no information was entered, the display reads:
NO DATA IN MEMORY
Press
▼
twice to go to the next setting.
DM DATA TRANSFER
The display reads:
DM DATA TRANSFER TO COMPUTER
Press
ENTER
to transfer data to a computer. If no data was
entered, the display reads:
NO DATA IN MEMORY
Press
▼
twice to go to the next setting.
DM DELETE ALL DATA IN MEMORY
The display reads:
DM DELETE ALL DATA IN MEMORY
Press
ENTER.
The display reads:
DM DELETE ALL
DELETE ALL? NO
Press the
▲
or
▼
buttons to toggle between
YES
and
NO.
To choose
NO,
press
ENTER
when it is displayed. The
display reads:
DM DELETE ALL DATA IN MEMORY
Press
▼
to go to the next setting (see
DM QUIT
below).
To choose
YES
, press
ENTER
when it is displayed. The
display briefly reads:
CARRIED OUT
The display automatically returns to the start-up menu.
Press the
▲
or
▼
buttons to go to the next MM setting
that requires programming or go to the
MM STOP-TIME
MEASURING
program to do a test.
DM QUIT
The display reads:
DM QUIT
Press
ENTER
to quit the
DM
submenu and to return to the
MM
MEASURING DATA MANAGEMENT.
Press the
▲
or
▼
buttons to go to the next
MM
setting
that requires programming or go to the
MM STOP-TIME
MEASURING
program to do a test.
MM MEASURING DATA
MANAGEMENT
SECTION 5—PROGRAMMING
Stop-Time Measurement Device
