Rockford Systems, LLC
1-800-922-7533 (U.S.A. only)
24
Press
ENTER
to go into the submenu.
P1 TIME SETTING
The display reads:
P1 TIME SETTING TIME 12:00
Press
ENTER
to bring the cursor to the first digit. Use the
▲
and
▼
buttons to scroll through the numbers. Press
ENTER
to confirm your choice and to go to the next digit.
After confirming all digits, press
ENTER
until the cursor
no longer shows. The time is now set.
Press
▼
to go to the next setting.
P1 DATE SETTING
The display reads:
P1 DATE SETTING DATE 11.09.1997
The date is displayed numerically by the month,day, and
year. Press
ENTER
to bring the cursor to the first digit.
Use the
▲
and
▼
buttons to scroll through the numbers.
Press
ENTER
to confirm your choice and to go to the
next digit. After confirming all digits, press
ENTER
until
the cursor no longer shows. The date is now set.
Press
▼
to go to the next setting.
P1 SENSOR SELECT
The display reads:
P1 SENSOR SELECT ANALOG CABLE TR.
This is the factory setting. To change the factory setting,
press
ENTER
and the display reads:
P1 SENSOR SELECT DIGITAL CABLE TR
Press
▼
to go to the next setting.
P1 LANGUAGE
The display reads:
P1 LANGUAGE ENGLISH
This is the factory setting. To change the factory setting,
press
ENTER
and the display reads:
P1 SPRACHE DEUTSCH
Press
▼
to go to the next setting.
P1 MEAS. UNIT
The display reads:
P1 MEAS. UNIT INCH
This is the factory setting. To change the factory setting
from inches to millimeters, press
ENTER
and the display
reads:
P1 MEAS. UNIT MM
Press
▼
to go to the next setting.
P1 DISPLAY LIGHT
The display reads:
P1 DISPLAY LIGHT ON
This is the factory setting. To change the factory setting,
press
ENTER
and the display reads:
P1 DISPLAY LIGHT OFF
Press
▼
to go to the next setting.
P1 QUIT
The display reads:
P1 QUIT
Press
ENTER
to quit the Parameter 1 submenu and to
return to the
MM
PARAMETER 1 BASIC SETTINGS
.
Press the
▲
or
▼
buttons to go to the next MM setting
that requires programming or go to the
MM STOP-TIME
MEASURING
program to do a test.
MM PARAMETER 1
BASIC SETTINGS
SECTION 5—PROGRAMMING
Stop-Time Measurement Device
(Continued on next page.)
