29
Lower Leg Assembly
L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
L o w e r L e g I n s t a l l a t i o n
Clean the upper tubes.
Apply grease to the inner surfaces of the wiper seals.
Wiper seals may already be greased from the factory. Do not apply extra
grease to seals that already have grease on them.
Install the lower leg onto the upper tube enough to engage the upper
bushing with the upper tube.
NOTICE
Make sure both wiper seals slide onto the tubes without folding the outer lip
of either seal.
The inside bottom of the lower leg should not contact the spring or damper
shafts. A gap between the shaft ends and the lower leg bolt holes should
be visible.
1
SRAM® Butter
2
3
