14
Lower Leg Seal Service
Remove the outer wire spring from each new wiper seal and set them aside.
Insert the narrow end of a new wiper seal into the recessed end of the
appropriate RockShox® seal installation tool.
Hold the lower leg steady and press the wiper seal into the lower leg until
the seal surface is flush with the top of the lower leg.
Repeat on the other side.
NOTICE
Only press the wiper seal into the lower leg until it is flush with the top
surface of the lower leg and perpendicular. Pressing the wiper seal below
the top surface of the lower leg will compress the foam rings.
Install the outer wire spring.
200 Hour Service
Continue the 200 Hour Service with
Air Spring Service
.
5
32 mm
Flangeless
32 mm
Flanged
6
7
32 mm
Flangeless
32 mm
Flanged
8
