25
Damper Service
Remove the outer seal head o-ring. Use a pick to pierce and remove the
inner seal head o-ring.
Apply grease to the new o-rings and install them on the seal head.
Remove the glide ring from the piston and install a new glide ring.
Install the seal head on the damper shaft.
Insert the rebound damper piston into the bottom of the upper tube at an
angle with the
side opposite the glide ring split entering first.
Continue to
angle and rotate the piston until the glide ring is inside the upper tube.
10
11
12
space between frames
space between steps
13
