20
Air Spring Service
Apply a liberal amount of grease to the air piston and top out bumper cone.
Apply a liberal amount of grease 40-60 mm wide around the air shaft.
Install the floating seal head, floating seal head top out bumper, aluminum
support washer, wavy washer, and air shaft guide, in that order, onto the
air shaft.
Push the air shaft and seal head assembly into the bottom of the upper
tube.
Orient the washers so that the aluminum support washer goes into the
upper tube first, followed by the wavy washer.
Use your fingers to firmly press the air shaft guide into the upper tube until
it snaps into place.
SRAM Butter (Bluto™ or Reba®) / PM600 (Reba only)
12
SRAM Butter (Bluto or Reba) / PM600 (Reba only)
13
Seal head assembly orientation
14
