17
Air Spring Service
Reba
®
100 mm travel forks:
Remove the jounce bottom out bumper from
the air shaft.
Push the air shaft into the upper tube to prevent it from getting scratched
while removing the retaining ring.
Use a flat blade screwdriver to push the air shaft guide under the
retaining ring.
Place the tips of large retaining ring pliers into the eyelets of the retaining
ring. Press firmly on the pliers to push the air shaft guide into the upper tube
enough to compress and remove the retaining ring.
NOTICE
Scratches on the air shaft will allow air to bypass the seal head into the
lower leg. Scratches can result in reduced spring performance.
Firmly pull on the air shaft to remove the air spring assembly from the
upper tube. Clean and inspect the assembly for damage.
3
Flat blade screwdriver
Retaining ring pliers
4
5
