16
Air Spring Service
2 0 0 H o u r S e r v i c e
A i r S p r i n g S e r v i c e
⚠
WARNING- EYE HAZARD
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to do so
can result in injury and/or damage to the fork.
NOTICE
Only use SRAM® Butter grease on Bluto™ forks. Use Liquid O-Ring® PM600 military
grease or SRAM Butter when servicing Reba® forks. No other grease is approved
for use.
When replacing seals and o-rings, use your fingers or a pick to remove the seal or
o-ring. Spray isopropyl alcohol on each part and clean with a rag.
Apply grease to the new seal or o-ring.
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
Remove the top cap.
Remove the top cap o-ring. Install a new o-ring.
Do not apply grease to the top cap threads.
SRAM Butter grease Bluto or Reba
PM600
Reba only
1
Cassette/top cap tool
24 mm
Spline top cap
Hexagon top cap
2
