background image

SRAM

®

 LLC WARRANTY

EXTENT OF LIMITED WARRANTY

Except as otherwise set forth herein, SRAM warrants its products to be free from defects in materials or workmanship for a period of two years after 

original purchase.

 

 This warranty only applies to the original owner and is not transferable. Claims under this warranty must be made through the retailer 

where the bicycle or the SRAM component was purchased. Original proof of purchase is required. 

Except as described herein, SRAM makes no other 

warranties, guaranties, or representations of any type (express or implied), and all warranties (including any implied warranties of reasonable care, 
merchantibility, or fitness for a particular purpose) are hereby disclaimed.

LOCAL LAW

This warranty statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state (USA), from 

province to province (Canada), and from country to country elsewhere in the world.
To the extent that this warranty statement is inconsistent with the local law, this warranty shall be deemed modified to be consistent with such law, under 

such local law, certain disclaimers and limitations of this warranty statement may apply to the customer. For example, some states in the United States of 

America, as well as some governments outside of the United States (including provinces in Canada) may:
Preclude the disclaimers and limitations of this warranty statement from limiting the statutory rights of the consumer  

(e.g. United Kingdom).
Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations.

For Australian customers:

This SRAM limited warranty is provided in Australia by SRAM LLC, 1000 W. Fulton Market, 4th Floor, Chicago, IL, 60607, USA. To make a warranty claim 

please contact the retailer from whom you purchased this SRAM product.  Alternatively, you may make a claim by contacting SRAM Australia, 6 Marco 

Court, Rowville 3178, Australia. For valid claims SRAM will, at its option, either repair or replace your SRAM product.  Any expenses incurred in making 

the warranty claim are your responsibility.  The benefits given by this warranty are additional to other rights and remedies that you may have under laws 

relating to our products.  Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.  You are entitled to a replacement 

or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.  You are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

LIMITATIONS OF LIABILITY

To the extent allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event shall SRAM or its third party 

suppliers be liable for direct, indirect, special, incidental, or consequential damages. 

LIMITATIONS OF WARRANTY

This warranty does not apply to products that have been incorrectly installed and/or adjusted according to the respective SRAM user manual. The SRAM 

user manuals can be found online at sram.com, rockshox.com, avidbike.com, truvativ.com, or zipp.com.
This warranty does not apply to damage to the product caused by a crash, impact, abuse of the product, non-compliance with manufacturers specifications 

of usage or any other circumstances in which the product has been subjected to forces or loads beyond its design.
This warranty does not apply when the product has been modified, including, but not limited to any attempt to open or repair any electronic and electronic 

related components, including the motor, controller, battery packs, wiring harnesses, switches, and chargers.
This warranty does not apply when the serial number or production code has been deliberately altered, defaced or removed.
This warranty does not apply to normal wear and tear. Wear and tear parts are subject to damage as a result of normal use, failure to service according to 

SRAM recommendations and/or riding or installation in conditions or applications other than recommended.

Wear and tear parts are identified as:

Dust seals

Bushings

Air sealing o-rings

Glide rings

Rubber moving parts

Foam rings

Rear shock mounting hardware and 

main seals

Upper tubes (stanchions)

Stripped threads/bolts (aluminium, 

titanium, magnesium or steel)

Brake sleeves

Brake pads

Chains

Sprockets

Cassettes

Shifter and brake cables (inner and 

outer)

Handlebar grips

Shifter grips

Jockey wheels

Disc brake rotors

Wheel braking surfaces

Bottomout pads

Bearings

Bearing races

Pawls

Transmission gears

Spokes

Free hubs

Aero bar pads

Corrosion

Tools

Motors

Batteries

Notwithstanding anything else set forth herein

, the battery pack and charger warranty does not include damage from power surges, use of improper 

charger, improper maintenance, or such other misuse.
This warranty shall not cover damages caused by the use of parts of different manufacturers.
This warranty shall not cover damages caused by the use of parts that are not compatible, suitable and/or authorised by SRAM for use with SRAM 

components.
This warranty shall not cover damages resulting from commercial (rental) use.

Содержание Bluto

































Отзывы: