FT 300 Force Torque Sensor - Instruction Manual
90
Appendix B – Applied Standards
This section describes all applied harmonized standards for the design and production of the Robotiq Force Torque Sensor FT
300. Standards are applied were applicable, some points may not be applied if not applicable to this specific product. Conformity
is not enforced by any laws, it is self-applied and the aim is to define normal safety and performance requirements for similar
products.
Info
Conformity of the product is only met if all instructions of the following manual are followed. Among others; installation,
safety measure and normal usage must be respected.
The following standards have been applied:
NF EN ISO 12100
2010
Safety of machinery — General principles for design — Risk assessment and risk reduction
NF EN IEC 60204-
1
2006
Safety of machinery — Electrical equipment of machines — Part 1: General requirements
