ROBOTIQ FT 300 Скачать руководство пользователя страница 42

Страница: 42 / 90

FT 300 Force Torque Sensor - Instruction Manual

4.1.1. ActiveDrive Toolbar

The ActiveDrive Toolbar is automatically installed with the Force Torque Sensor URCap Package. It enhances the guiding mode on

Universal Robots by allowing the robot to be hand guided smoothly and easily towards a waypoint. The ActiveDrive feature is a

great way to assist the Path recording described in the Path Recording section, by hand guiding the robot while recording a path.

Info

The Force Torque Sensor URCap Package contains the ActiveDrive Toolbar. Therefore, the toolbar is automatically

installed with the URCap Package. The ActiveDrive Toolbar can be installed and used without the URCap Package (refer

to the UR Package without URCaps section for information on how to install the toolbar without the URCap).

Warning

Verify that the Force Torque Sensor is aligned with the robot arm using the dowel pin. This ensures that the Sensor’s axes

are aligned with the robot and that the ActiveDrive feature will work correctly.

The robot speed set with the Speed slider will affect the speed at which the robot moves in the ActiveDrive mode. Verify and adjust

the speed slider to the desired speed. It has to be greater than 50%.

Overview

Toolbar collapsed

Tap the ActiveDrive button to expand the toolbar.

Toolbar expanded

Tap the mode selector to expand.

ActiveDrive modes expanded

Содержание FT 300



























































































Результаты поиска

Содержание FT 300

Отзывы:

Похожие инструкции для FT 300

Бренды по названию

Популярные бренды

ROBOTIQ FT 300, Инструкция по эксплуатации

Результаты поиска

Содержание FT 300

Отзывы:

Похожие инструкции для FT 300

Бренды по названию

Популярные бренды