RK Rose+Krieger RK MultiControl II duo, Руководство по сборке

Страница: 214 / 230

2. Press the button ( ) or the button ( ) to save the cur-
rent position of the drive to the respective memory position.
ð
The drive position has been saved.
3. Press and hold the button ( ) or the button ( ), on
which the position you wish to assume, is saved.
ð
The drive stops automatically when the stored memory
position (e.g. 28%) is reached.
The stored memory positions remain in place even
after the control unit has been switched off.
7.8 “Select user” menu
The function allows a user to be selected.
User 1 ( ) is set as the active user in the factory
and is displayed at the top right of the display
screen.
Prerequisite:
n The short menu for the hand switch is displayed Ä Page 170 .
1. Select the “Select user” menu ( ).
Storing memory position
Fig. 134: Storing memory position
Driving to memory position
Fig. 135: Driving to memory position
Selecting a menu
Fig. 136: Selecting a menu
Operating the hand switch with 6 function buttons
Select user menu
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 214