SteelCentral™ Enterprise NetProfiler Appliance Installation Guide
13
CHAPTER 4
Configuring the Software
The Enterprise NetProfiler is shipped from the factory with its software already installed. This chapter describes how
to configure the factory-installed software.
If you need to install and configure new software, refer to
Chapter 5, “Updating NetProfiler Software.”
For instructions on adding an Expansion Module to an existing Enterprise NetProfiler, refer to
This chapter includes:
“Installation time considerations” on page 14
“Configure the Base Module” on page 14
“Configuring the Expansion Modules” on page 15
“Configure the Dispatcher Module” on page 16