SteelCentral™ Enterprise NetProfiler Appliance Installation Guide
25
Install the Dispatcher Module
Updating NetProfiler Software
Please enter the Manager (UI) device's IP address
ip:
10.38.128.196
New Settings:
Product: SCNP-04280-DP
IP Address: 10.38.131.50/18
Gateway: 10.38.128.1
NOTE: Setup will conclude with a reboot of this SteelCentral device. After
all modules have rebooted, setup can be completed by logging into the UI at
https://10.38.128.196/
Login as admin/admin.
NOTICE: All existing settings and logs will be lost.
Finish Setup and Reboot? (yes/no):
yes
Working.....
When the Dispatcher Module reboots, it uses the IP address that you assigned to the Base Module and assigns the Base
Module the IP address that you assigned to the Dispatcher Module in the dialog above. The exchange of IP addresses
between the Dispatcher and Base Modules is performed automatically.
After the Dispatcher Module reboots, you can configure link aggregation (port channel bonding) on your switch.
