Riverbed SteelCentral NetExpress 470, Руководство по модернизации и обслуживанию

Страница: 77 / 140

Upgrade and Maintenance Guide 77
R
eplacing Memory
Replacing SteelHead xx50
Components
When replacing memory, you must use approved memory modules. Contact your Riverbed sales
representative to obtain the correct memory modules.
Note: When you replace memory modules, you must wear a grounded ESD antistatic strap to protect the hardware
against electrostatic discharge. Make sure that the strap makes skin contact prior to handling equipment. For details,
see
“Electrostatic Discharge Guidelines” on page 8 .
To replace the memory modules
1. Power down the system.
2. Disconnect the appliance from the electrical outlet and peripherals.
3. Remove the two locking screws on the back of the chassis.
Figure 3-9. Removing the Locking Screws
4. Position your thumbs on the top of the appliance and slide the cover back from the chassis.
5. Carefully lift the cover away from the appliance.
6. Press the ejector tabs on the memory slots down and outward, and gently pull the memory module out
of the slot.