manualshive.com logo in svg

RITZ ICO 245, Руководство пользователя, Страница: 47 / 50

Поделиться
Скачать
RITZ ICO 245 Скачать руководство пользователя страница 47

6 Symbols and abbreviations

6.1  Symbols and abbreviations

The following abbreviations have been used in this manual:

Abbreviation

Explanation

1.

2.

3.

The numbers in a list indicate the individual steps of an
instruction that follow on from one another

è

Outcome

»

1. Measures to prevent the consequences of a hazard
warning

2. List with no fixed sequence

MA*

Tightening torque for dry installation without additional
lubricant (coefficient of friction μ = 0.14)

The following symbols have been used in this manual:

The mandatory sign "Earth before use" indicates that
this device may only be put into operation if it has been
earthed beforehand.

The mandatory sign "Disconnect before maintenance or
repair" is a reminder to only work on this device when
the associated electrical system is de-energized.

This symbol indicates that work on this device should
only be carried out by specially qualified personnel.

ICO 72,5...245

USER MANUAL
Symbols and abbreviations

 

 

44/47

Содержание ICO 245



















































Отзывы:

Нет отзывов