RITZ ICO 245 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 50

RITZ ICO 245 Скачать руководство пользователя страница 1

Continued safety and installation instructions

The high voltage current transformer works on the principle of the inductive transformer. The secondary side is
galvanically separated from the primary side. It is used in switchgear, switching device combinations and power
distribution systems in connection with secondary devices (relays, meters, indication instruments). The instru‐
ment transformer is designed in oil-paper insulation technology. Head housing and base are made of aluminum
and galvanised steel, the insulator is made of silicone. Refer to the rating plate on the device for the operational
specifications.

1

Oil level indicator

2

Ring bolts for transport purposes

3

Primary connection

4

Insulator

5

Oil drain screw

6

Earthing bolt holes

7

Terminal box with secondary terminals

8

Rating plate

UNPACKING
Check the transformer for completeness and damage.
Pay attention to sharp edges. You could get cut on them.
If the transformer shows any signs of external damage,
there is a risk of electric shock during commissioning.

STORAGE
Store the transformer at an ambient temperature between
-25°C and +40°C.
»

The transformer must preferably be stored in a ver‐
tical position and screwed to the ground.

»

If you store the transformer in a lying position, the
device must stand upright for at least 24 hours before
it can be put into operation.

Secure the intrument transformer against slipping, tilting
and falling down.

TRANSPORT
The  transformer  must  be  handled  by  trained  personnel
using  suitable  transport  equipment  (crane).  Please  note
the  transport  instructions  on  the

Ò

dimensional drawing.

Observe the weight specified on the

Ò

rating plate. Caution:

the transformer is top-heavy!

»

Means of transport permitting, the transformers may
be transported in a vertical position.

»

Larger transformers are transported in a horizontal
position.

If any damage occurs during transport or storage, please
contact us directly.

Safety and installation instructions. Please read before use!

GB

ICO

High voltage current transformer for outdoor use

Page

1/3

Version: 09/03/2020

GERMANY HAMBURG • WIRGES • KIRCHAICH • DRESDEN

AUSTRIA MARCHTRENK | HUNGARY KECSKEMÉT | CHINA SHANGHAI | USA HARTWELL

Continued on next page

1
2
3
...
»

Содержание ICO 245



















































Отзывы:

Нет отзывов