RITZ ICO 245 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 50

RITZ ICO 245 Скачать руководство пользователя страница 11

CAUTION

Beware of health hazards and serious damage to property

NOTICE

Note on the possibility of considerable damage to property

1.2.3 How do you use this manual?

This user manual is part of the device you have received.

NOTICE

Keep this manual and all applicable documents available at all
times, to all users, at the place where the device is used.

In addition to this user manual, the applicable versions of the per‐
tinent national laws, regulations and provisions must be observed.

1.3 For your safety

1.3.1 When is it dangerous to use the device?

Any applications of the transformer not described in this user manual
could result in serious personal injury, or even death, and cause
serious damage to property. Any other or additional use as well as use
outside the permissible operating values (

Ò

Rating plate) contradicts

the intended use of the device.

Foreseeable misuse

ICO 72,5...245

USER MANUAL
Read first, then take action!

8/47

«
...
9
10
11
12
13
...
»

Содержание ICO 245



















































Отзывы:

Нет отзывов