RITZ ICO 245 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 50

RITZ ICO 245 Скачать руководство пользователя страница 10

1.2 About this manual

1.2.1 Who is this manual intended for?

The target group includes everyone involved in the installation,
operation and maintenance of this device.

NOTICE

Please read this user manual carefully before commissioning the
device and observe all the regulations and information. This helps
prevent personal injury and damage to property.

1.2.2 How is this manual set out?

The theory section gets you ready to use the device safely and
correctly.
The practical section shows you how to connect the device and when to
disconnect it from the mains.
The fourth section deals with questions about repair and service.

Some of the information and illustrations in this manual may
differ from the features of your device. This includes details of
special equipment, abstractions and example illustrations.

The safety instructions are differentiated according to the type and
severity of the hazard:

DANGER

Danger to life

WARNING

Warning of serious injury

Fig. 1: Read this user
manual first than take
action!

Layout of the manual

Layout of the safety
instructions

ICO 72,5...245

USER MANUAL

Read first, then take action!

7/47

«
...
8
9
10
11
12
...
»

Содержание ICO 245



















































Отзывы:

Нет отзывов