RiTTO TWINBUS, Системное руководство

Страница: 88 / 197

Inst
alla
tion
Installation: Assembly, connection and start-up
88
2.5.10 TwinBus radio signalling device 1 7950
Assembly
Starting up
Program transmitter codes
delete transmitter codes
Remove the TwinBus device and the supplied components from the packaging.
Plug the radio signalling device into a socket of your choice.
Transfer the radio codes of the signalling unit of the TwinBus door intercom and video
systems to the radio signalling device.
When selecting a socket, make sure the radio connection between the transmitter unit and
the radio signalling device is not affected. Brickwork and other absorbing materials reduce
the range of the radio signal.
Avoid using the device in the vicinity of large metal surfaces or close to the floor. If you have
to use the device close to metal surfaces, keep a distance of at least 0.1 m.
Note:
You can use the power output of the radio signalling device as a socket for any electrical device
(230 V AC / 50 Hz, up to 16 A).
Activity Result
Activity Result
Press and hold buttons for 5 s
Flashing and
Acoustic signal for
confirmation
RiTTO
or
1 7 6 5 6 /0 0
1 7 8 5 6 /0 0
or
Illuminating,
flashing and
Acoustic signal for
confirmation
press left button briefly
LEDs go out and
Acoustic signal for
confirmation
Press and hold buttons for 15 s until
Acoustic signal for confirmation