Rioned CityJet, Руководство пользователя

Страница: 75 / 98

MAINTENANCE
75
6.8 Maintenance every 250 hours of operation or at least once
every six months
The following parts must be maintained every 250 hours of operation or at least once every six months:
6.8.1 Lubricate moving parts
The following parts must be lubricated every 250 hours of operation or at least once every six months:
>
all pivot points of the swivel arm
> the latch of the swivel arm
> the gears of the high pressure reel
> the hose guide
6.8.2 Clean pressure regulator
> Clean the pressure regulator every 250 hours of operation or at least once every six months.
> Carefully remove all the sand.
Leakage, contamination or damage
If the high pressure valve is closed, you CANNOT read the pressure on the pressure gauge. You also
CANNOT read the pressure on the pressure gauge if the spray gun is connected but the trigger is not
pulled.
If the pressure gauge nevertheless shows a pressure reading, there is leakage or the non-return valve is
dirty or damaged. In that case, do the following:
1. Turn off the machine.
2. Unscrew the hose coupling.
3. Clean or replace the non-return valve.
4. Check that the O-ring is still in good condition.
5. Check that the sealing ring is still in good condition.
6.9 Maintenance every 1000 hours of operation or at least once
a year
The following parts must be maintained every 1000 hours of operation or at least once a year:
6.9.1 Change hydraulic oil
Change the oil in the hydraulic system every 1000 hours of operation (or at least once a year).
Use oil from Rioned. P/N 71-003-000-046.
6.9.2 Clean suction valves of high pressure pump
Clean the suction valves of the high pressure pump once a year.
See accompanying annex for more information.
NOTE
Proper maintenance considerably extends the service life of the pressure regulator!