Rioned CityJet, Руководство пользователя

Страница: 74 / 98

MAINTENANCE
74
6.5.2 Clean water filter
Clean the water filter as follows:
1. Close the supply valve in the suction hose.
2. Unscrew the filter cap from the filter body.
3. Clean the filter screen and other contaminated parts of the filter.
4. Screw the filter cap back onto the filter body.
5. Open the supply valve in the suction hose.
6. Check the water filter for leaks.
Clean the water filter sooner if it is very dirty.
6.5.3 Check high pressure hose and other hoses
The high pressure hose may be damaged during use. Therefore perform the following checks:
>
Check the high pressure hose for wear and damage every time you reel it in.
> Also check all the other hoses for wear and damage.
> Check all the hoses and connections for leaks.
6.5.4 Maintenance of remote control
The remote control requires almost no maintenance, but the following aspects require your attention:
>
Make sure the on/off switch of the transmitter operates smoothly. It may stick if not kept clean, and
may eventually stop working altogether.
> Protect the transmitter from water/moisture.
> Do not clean transmitter and receiver with a pressure washer or any other type of sprayer.
> Charge and discharge the transmitter regularly.
> Regularly disconnect the receiver's connector plug; otherwise it will stick in place, which will prevent
proper operation.
6.6 Weekly maintenance
Clean the bodywork weekly. Use lots of water and automotive shampoo. The bodywork should be cleaned
earlier if it is heavily soiled.
6.7 Maintenance every 50 hours of operation
The nozzle holes must be poked clean every 50 hours of operation: