Rioned CityJet, Руководство пользователя

Страница: 71 / 98

MAINTENANCE
71
6 Maintenance
6.1 Safety instructions
ALWAYS observe the following points during maintenance, inspection and installation:
>
You may only perform this work if you are qualified to do so. You must have read and understood the
user manual.
> You may only work on the machine when it is not running.
> You must stop the machine (take it out of service) correctly (see section ‘
Ending the work
’).
> Clean the pump if it has pumped liquids that could pose a health hazard.
> When you have finished your work, IMMEDIATELY reinstall all safety and protection provisions and
make them functional.
> Follow all instructions before you start the machine again (see section ‘
Starting the engine
’).
6.2 Making changes to the machine
You may ONLY make changes to the machine if you have received written authorization from Rioned. The
use of original replacement parts and Rioned-approved accessories is important for safety.
If you use other parts, Rioned is NOT liable for any consequential damage.
6.3 Maintenance schedule
The next scheduled maintenance is set to 360 days or 250 hours of operation on the e. At the end
of these 360 days (or 250 hours of operation, whichever comes first) a message appears on the e
indicating that periodic maintenance is required (see section ‘
Management function e
’).
WARNING!
• Before you start any maintenance or repair work, take the following
precautions:
• ALWAYS stop the engine first.
• Depressurize the system by opening the high pressure valve.
• If the spray gun is attached to the high pressure hose, squeeze the trigger.