Rioned CityJet Скачать руководство пользователя страница 67

Страница: 67 / 98

OPERATION: EXTRA FUNCTIONS

5.8.3

ECO Start/Stop

This variant of the eco mode allows the engine to be stopped when spraying is stopped and automatically
restarted when spraying is restarted.

Stopping the engine

1. Press the High pressure on/off button:

Now the following happens:

•

The spraying of the water is stopped.

•

The engine speed drops.

•

If no action is taken, the engine stops after thirty seconds.

Starting the engine

The engine can be started in two ways:

1. Press the High pressure on/off

button:

Now the following happens:

•

The engine is started if necessary.

•

Water comes out of the high pressure hose.

OR:

1. Press the Engine on/off

button:

2. Press the High pressure on/off button:

Now water comes out of the high pressure hose.

5.8.4 ECO Stop

This variant of the eco mode allows the engine to be stopped when spraying is stopped but NOT
automatically restarted when spraying is restarted.

Stopping the engine

Press the High pressure on/off button:
Now the following happens:
>

The spraying of the water is stopped.

The engine speed drops.

If no action is taken, the engine stops after thirty seconds.

Starting the engine

With this variant of eco mode, the engine can only be started in one way:
1. Press the Engine on/off button:
2. Press the High pressure on/off button:

Now water comes out of the high pressure hose.

3. Increase the speed for higher pressure and more water: turn the navigation knob clockwise:

2. Increase the speed for higher pressure and more water: turn the navigation

knob clockwise:

3. Increase the speed for higher pressure and more water: turn the navigation

knob clockwise:

Содержание CityJet



































































































Результаты поиска

Содержание CityJet

Отзывы:

Похожие инструкции для CityJet

Бренды по названию

Популярные бренды

Rioned CityJet, Руководство пользователя

Результаты поиска

Содержание CityJet

Отзывы:

Похожие инструкции для CityJet

Бренды по названию

Популярные бренды