Rioned CityJet, Руководство пользователя

Страница: 62 / 98

OPERATION: EXTRA FUNCTIONS
62
5.5 Hose meter counter e
5.5.1 Introduction
The hose counter indicates how many metres of high pressure hose is in the sewer.
Things to keep in mind during use
Keep the following in mind when using the hose counter:
>
The hose counter only measures when the ignition is turned on and the emergency stop is off.
> The Riomote control must therefore be paired!
> Make sure the hose is always rolled up completely when you turn the ignition on. This is important,
because it is the reference position for the measurements.
> Make sure the hose is always stretched tight, because the measurement takes place on the reel.
> The count is in whole metres with a theoretical maximum deviation of one metre when the hose is
tightly coiled.
5.5.2 Activating the e
5.5.3 Switching the hose counter on and off
The hose counter is switched on as follows:
1. Select the management function (see section ‘
Management function e ’)
The hose counter is switched off as follows:
1. Turn the navigation knob and select Off.
2. Press the navigation knob.
3. Select Set.
4. Select Back.
You are now back on the home screen. The hose counter is now switched off.
1. Turn the key of the e a quarter turn clockwise to position 1.
2. After a while this screen will be shown:
3. The hose counter is now directly available.
2. Press the navigation knob:
3. Select Hose Counter.
4. Press the navigation knob.
5. Press the navigation knob again. Hose Counter On turns blue.
The hose counter is now switched on.