Rioned CityJet, Руководство пользователя

Страница: 73 / 98

MAINTENANCE
73
6.4 Removal/installation of protective covers
6.5 Maintenance before the work
The following parts must be checked or cleaned before the work:
6.5.1 Check oil levels
> Check ALL the oil levels before the work.
> Top up as required.
If the oil level has dropped, there is probably a leak in the system. In that case, do the following:
1. Check all the gaskets, connections and lines in the system concerned.
2. Repair the defects immediately.
3. Top up with the correct oil.
Removal:
1. Insert the key into the lock.
2. Turn the key clockwise.
3. Turn knob A a quarter turn to the right.
4. Turn knob B a quarter turn to the left.
5. Lift the cover slightly.
6. Remove the cover.
Installation:
1. Insert the tabs of the cover into the corresponding slots.
2. Lower the front.
3. Turn knob A a quarter turn to the left.
4. Turn knob B a quarter turn to the right.
5. Turn the key anti-clockwise.
6. Remove the key.
NOTE
The maintenance of the engine is beyond the scope of this user manual. That
information can be found in the documentation you received with the machine.
NOTE
Oil consumption may be slightly higher than normal during the break-in period (20
hours).
A
B