Rioned CityJet, Руководство пользователя

Страница: 45 / 98

OPERATION: STANDARD FUNCTIONS
45
Starting spraying with the Riomote control
4.4.7 Stopping spraying
After unblocking, it is important to flush as follows: replace the ‘Open nozzle’ with the ‘Blind nozzle’.
Spraying can be stopped in two ways: with the e and with the Riomote control.
Stopping spraying with the e
2. Turn the navigation knob to increase (clockwise) or decrease (anticlockwise)
the speed:
1. Press button 4 ‘Start spraying’ (9-channel) or button 4 ‘HP on’ (11-channel).
2. Press button 2 ‘Increase speed’ (9-channel) or button 6 ‘Throttle up’
(11-channel).
The hose will now unwind and at the same time work its way into the clogged
sewer:
3. Check whether the water is drained off.
4. Continue flushing for a while after the blockage is removed.
5. Reel the hose in slowly at the same time.
TAKE CARE!
• Reel the high pressure hose onto the reel under pressure. If you do not do this,
the reel can be damaged by the squeezing action.
• Has the machine run out of water?
1. First reel the high pressure hose out.
2. Only then apply pressure to it.
> Press the High pressure on/off button.
> The LED for high pressure goes out: