Rioned CityJet, Руководство пользователя

Страница: 48 / 98

OPERATION: STANDARD FUNCTIONS
48
Depressurizing the system with the Riomote control
1. Press button 1 ‘Reduce speed’ (9-channel) or button 5 ‘Throttle down’ (11-channel) to reduce the
speed.
2. Press button 3 ‘Stop spraying’ (9-channel) or button 3 ‘HP off’ (11-channel) to depressurize the
system.
3. Press button 5 ‘Stop engine’ (9-channel) or button 2 ‘STOP’ (11-channel) to stop the engine.
4.6 Ending the work
4.6.1 Cleaning up, securing and draining
At the end of the work, complete the following steps:
>
Clean up the high pressure reel:
a. Close the high pressure valve.
b. Roll up the high pressure hose.
c. Secure the high pressure hose in the hose holder.
d. Secure the high pressure hose reel (position ‘O’).
e. Secure the hose guide.
> Put away all the attachments.
> Put away the Riomote control.
> Close the transfer valve.
> Drain any water that is still in the water tank via the drain valve.
4.6.2 Additional steps during freezing temperatures
The high pressure section of the machine its at high risk of freezing during freezing temperatures.
Therefore ALWAYS take the following precautions before departure after you have finished your work:
1. Open the drain valve for the water filter. This will drain the water tank.
2. When no more water comes out of the valve, Close the drain valve.
3. Unscrew the cap of the water filter.
4. Let the remaining water flow out.
5. Screw the cap of the water filter tight again.
6. Fill the water tank with 25 l antifreeze.
7. Turn the pressure regulator knob completely anticlockwise.
8. Check that the high pressure valve is closed.
9. Press the Engine on/off button on the e.
10. Let the engine idle.
11. Open the high pressure valve.
12. Press the High pressure on/off button on the e.
All the water is now pumped out of the high pressure hose.
13. Close the high pressure valve when antifreeze comes out of the high pressure hose. You will see that
the water turns blue.
14. Let the engine run a while longer. All the pipes now fill with antifreeze.
15. Press the High pressure on/off button on the e.
WARNING!
Drain water tanks, water filter, water pipes, water hoses and water containers after
EVERY service to prevent contamination with Legionella bacteria!