Rigel VP3500 Скачать руководство пользователя страница 9

Страница: 9 / 97

Acronym

Description

A term used to describe double high VME, VME64 , and VME64x boards that are 233.35 mm in height. Also used to

describe backplanes that interface to these same boards.

ANSI

American National Standards Institute, Inc.

ASYNC

Asynchronous communication is transmission of data without the use of an external clock signal.

Bridge

The logic that connects one computer bus to another, allowing an agent on one bus to access an agent on the other.

BSP

Software Board Support Package, such as Linux or VxWorks.

ECC

Error Correction Codes is a method used to detect and correct errors introduced during storage or transmission of data.

EEPROM

Electrically Erasable Programmable Read-Only Memory.

Ethernet

Ethernet is a family of frame-based computer networking technologies for local area networks (LANs).

Flash

Flash memory is a non-volatile computer storage chip that can be electrically erased and reprogrammed.

GbE

Gigabit Ethernet.

GPIO

General Purpose Input / Output.

IEEE

Institute of Electrical and Electronics Engineers.

MiniPCIe

A small form factor option module with a single PCI Express link that mounts securely on a host card.

NOR Flash

A type of Flash memory that offers fast and random accesses.

NVRAM

Non-Volatile Random Access Memory.

OpenVPX

The OpenVPX (VITA 65) System Specification is the first system-level VPX specification dedicated to the interoperability of

multi-vendor system and subsystem building blocks.

Software Operating System such as Linux or VxWorks.

PCI

Peripheral Component Interconnect is an industry0standard specification for connecting hardware devices to a computer’s central

processor.

PCIe or PCI

Express

Peripheral Component Interconnect Express. A high-speed serial computer expansion bus standard designed to replace the older

PCI, PCI-X, and AGP bus standards.

PCI-X

Peripheral Component Interconnect Extended is a performance-enhanced version of the PCI bus.

PMC

A PCI Mezzanine Card is a printed circuit board manufactured to the IEEE P1386.1 standard. This standard combines the electrical

characteristics of the PCI bus with the mechanical dimensions of the Common Mezzanine Card or CMC format (IEEE 1386 stan-

dard).

RS-232

RS-232 (Recommended Standard 232) is a standard for serial binary single-ended data and control signals connecting between a

DTE (Data Terminal Equipment) and a DCE (Data Circuit-terminating Equipment).

RS-422

RS-422 (Recommended Standard 422) provides for data transmission using balanced or differential signaling with unidirectional/

non-reversible, terminated, or non-terminated transmission lines, point to point, or multi-drop.

SBC

Single Board Computer.

VITA

VMEBUS International Trade Association. VITA is an incorporated, non-profit organization of vendors and users having a common

market interest in real-time, modular embedded computing systems.

VPX

VPX, formerly known as VITA 46, is an ANSI standard (ANSI/VITA 46.0-2007) [1] that provides VMEbus-based systems with support

for switched fabrics over a high speed connector.

XMC

XMC is a PMC with high-speed serial fabric interconnect defined by the VITA 42 standard. XMC specifies an additional connector

(P5) that support PCI Express(VITA 42.3) or other high speed serial formats such as Serial RapidIO (VITA 42.2) and Parallel Rapi-

dIO (VITA 42.1).

Table 1 : Table of Acronyms

VP3500 User Manual • Document Number 101-3500-0001 • Revision A0

Property of Rigel Engineering, LLC. Confidential & Proprietary

690 Cone Park Court, Merritt Island, Florida 32952

page 9

Содержание VP3500


































































































Результаты поиска

Содержание VP3500

Отзывы:

Похожие инструкции для VP3500

Бренды по названию

Популярные бренды

Rigel VP3500, Руководство пользователя

Результаты поиска

Содержание VP3500

Отзывы:

Похожие инструкции для VP3500

Бренды по названию

Популярные бренды