Rigel VP3500 Скачать руководство пользователя страница 10

Страница: 10 / 97

Section 1 : Introduction

Figure 1 : VP3500

1.1 : Overview

Rigel’s VP3500 6U VPX carrier card presents system designers with the ability to incorporate a wide

variety of functionality to any 6U VPX system. The VP3500 features two PMC/XMC slots, two MiniPCIe

sockets, and an integrated 5-port Gigabit Ethernet switch (VITA 46.6). The VP3500 is available in various

ruggedization levels including commercial or extended temperature, air or conduction-cooled and rugged

versions for harsh environments.

The VP3500 was designed from the start with high-performance and complete flexibility in mind. The

VPX backplane switch interface consists of four Generation 2 PCIe FAT pipes (4x4 lanes - default) to

P1. The XMCs support eight lanes of PCIe, while each PMC slot is capable of PCI-X, 133MHz, 64-bit

performance. PMC and XMC rear IO routing is configurable, and adheres to VITA 46.9 (P64s to VPX P3/

P5 or X38s to P3/P5, X12d+X8d to P4/P6). A pluggable IO module allows the system designer to mix

and match the PMC or XMC selection and their IO requirements to the backplane. Additionally, the two

MiniPCIe sockets support Full-Mini or Half-Mini card form factors with front panel and rear IO routing

options.

The integrated 5-port Gigabit Ethernet switch may save a system chassis slot, as it can take the place

of a switch card in most applications. It adheres to VITA 46.6 for Gigabit Ethernet Control Plane on VPX

(two 1000BASE-T and 2x 1000BASE-BX ports to VPX P4). The fifth port is routed to VPX P6 (User IO),

and may be used externally as a maintenance port or simply as an additional GbE port.

VP3500 User Manual • Document Number 101-3500-0001 • Revision A0

Property of Rigel Engineering, LLC. Confidential & Proprietary

690 Cone Park Court, Merritt Island, Florida 32952

page 10

Содержание VP3500


































































































Результаты поиска

Содержание VP3500

Отзывы:

Бренды по названию

Популярные бренды

Rigel VP3500, Руководство пользователя

Результаты поиска

Содержание VP3500

Отзывы:

Бренды по названию

Популярные бренды