RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 33 / 70

6. Setup and activation 31
6) Install a saw band if it has not yet been installed in the machine (see Chap. 9.4 on p. 51).
7) Check all safety equipment (see Chap. 9.7 on p. 58).
8) Check whether all protective equipment is installed and connected (see Chap. 7.2 on p. 33).
9) Activate the BSM 630 by turning the main switch on (see Chap. 7.3 on p. 33).
Danger!
Running saw band may cause serious severance injury!
l
The machine may only be operated by one person.
l
Before running the saw band, the operator must ensure that no persons are
behind the workpiece or in the danger area.
10) Test to see whether the electrical connection is correct by observing the directional move-
ment of the saw band:
a) Switch on saw band by pressing push buttons on handle and determine its directional
movemt
b) Release push buttons . Saw band stops
c) The electrical connection is correct (see Chap. 1.6 on p. 7) if the saw band moves from
the front of the machine to the back.
d) If the saw band moves from the back to the front, the electrical connection must be re-
configured (see Chap. 6.5 on p. 29).
11) Finally, make a test cut (see Chap. 7.6 on p. 38).
BSM 630