RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 50 / 70

48 9. Maintenance
Activity How often Description
Clean the machine Daily or after usage (see Chap. 9.1 on p. 48)
Check saw-band tension Weekly (see Chap. 9.2 on p. 49)
Check safety equipment Weekly (see Chap. 9.7 on p. 58)
Grease machine Weekly
Lubricate the hinge of the
saw frame
DGUV Roule 3 examination (or
applicable national regulation)
See DGUV Roule 3
Request service technician
or authorised person
Examination according to IndSafReg
§10 (2) (or according to national reg-
ulation) Time limits according to §
3 Section 3 (Risk assess-
ment)
Request service technician
or authorised person
Before every maintenance activity (except for examination of safety equipment)
1) Push saw bos in the rear home postion.
2) If a workpiece is still in the machine, remove it (see Chap. 7.5 on p. 35).
3) Turn the machine off at the main switch , and ensure it is not activated again.
After every maintenance activity
Record performed activities (except cleaning) in the maintenance protocol (see Chap. 9.8 on p.
59).
9.1 Cleaning the machine
Attention!
Do not used compressed air to clean the machine!
Compressed air blows shavings and dust into the machine guides, bearings and
electrical equipment. The machine may be damaged as a result.
Attention!
Plastic waste contaminates the environment!
Dispose of all shavings and plastic waste according to locally applicable legal
stipulations.
How to clean the machine
1) If you have not already done so, execute the steps in Chap. 9. on p. 47 .
2) Remove shavings from machine parts with a hand broom, brush or vacuum cleaner.
3) Use a brush to remove the shavings in the guide rolls at the back saw-band guide.
4) Open the back saw band cover. Remove shavings with a hand broom, brush or vacuum
cleaner.
BSM 630