RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 22 / 70

20 4. Setup and function
4.2 Functionality
The BSM 630 saws plastic pipes -
l
with varying diameters,
l
made of various types of plastic,
l
with an adjustable saw angle.
The saw process is executed as follows:
l
The saw bow is placed in the rear position.
l
The desired saw angle is set.
l
The workpiece is inserted into the machine and clamped with min. two clamping belts
l
Open saw band cover only in cross-sectional size of the workpiece.
l
Switch on saw band and pull saw bow slowly forwards. The workpiece is sawed off.
l
Push back saw bow
l
The clamps on the workpiece are released, and the workpiece is removed from the
machine.
4.3 Safety concept
4.3.1 Push buttons
According to valid APR the BSM 630 must operate in jogging mode during processes that are
dangerous for the operator. This means that the operator must press the pressure switches of the
hand grip with both hands while sawing. As soon as the buttons are released, the motor of the
saw band stops.
Danger!
Running saw band may cause serious severance injury!
Risk of crushing by pulling down the saw bow!
l
The machine may only be operated by one person.
l
Before starting saw band or pulling down saw bow, the operator must
ensure that in the area behind the work area there are no persons.
l
When starting the work process, make absolutely sure that there are no
parts of the body (arms, hands etc.) in the danger zone.
BSM 630