RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 56 / 70

54 9. Maintenance
Saw band runs from diversion 1 wheel inwards
1) Loosen locking screws E
2) Turn the adjusting screws B and D a bit.
3) The plate tilts slightly.
4) Fasten locking screws E.
5) Turn diversion wheel 1 several times by hand to control the running behavior of the saw
band.
6) If necessary repeat the steps 1 to 5.
Sawband runs from diversion wheel 1 outwards
1) Loosen locking screws E
2) Turn the adjusting screws A and C a bit.
3) The plate tilts slightly.
4) Fasten locking screws E.
5) Turn diversion wheel 1 several times by hand to control the running behavior of the saw
band.
6) If necessary repeat the steps 1 to 5.
Sawband runs from diversion wheel 3 inwards
1) Adjust screws A and B.
Sawband runs from diversion wheel 3 outwards
1) Adjust screws C and D.
Information
l
Please note that the adjustments always have an interaction with the other
wheels. Most minimal changes are already successful.
l
After completing the adjustments always counter set screws and tighten
the fixing screws E.
l
To protect your machine check the running behavior always initially by
manually moving the saw blade.
BSM 630