RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 54 / 70

52 9. Maintenance
Warning!
Uncoiling the old saw band poses an injury risk - especially for the facial
area!
Operator and assisting person must be especially careful and wear protective
glasses.
4) Carefully uncoil the band.
5) Insert the saw band around the saw-band diversion-wheels. The teeth of the saw band must
point to the rear and in the cutting direction. Make sure that the saw band lies centrally on the
guide wheels.
6) Tension the saw band (see Chap. 9.2 on p. 49).
7) Check whether the saw band is placed centrally on all diversion-wheels and runs through the
guide-roll pair.
8) Check whether the saw band runs properly by carefully spinning the diversion-wheel clock-
wise.
9) Mount the removed saw-band covers at the right location.
10) Perform a test cut (see Chap. 7.6 on p. 38) and adjust the saw-band tension if necessary.
9.5 Adjusting saw band
Danger!
Running saw band may cause serious severance injury!
The assisting person mentioned below may only enter the hazard- or working
area after deactivating the machine with the main switch.
Danger!
Climbing onto the machine poses a fall- and injury risk due to sharp machine
parts!
It is not permissible to climb onto the machine when performing maintenance- or
any other kind of work. Use suitable climbing aids (e.g. stepladders or multi-pur-
pose ladders, but no leaning ladders).
Attention!
After sawing the hot saw band may burn the operator!
The saw band poses an injury risk!
Wear protective gloves when working with the saw band and let the saw band
cool down before touching it.
First check the saw band tension (see Chap. 9.2 on p. 49)
BSM 630