RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 60 / 70

58 9. Maintenance
Adjust upper saw bow stop
In certain cases, the bow stop must be readjusted.
1) Let back the saw bow gently on its TDC position.
2) Loosen with a suitable tool the locknut and turn the adjusting screw (3) to the desired direc-
tion and lock it with the nut.
3) Then perform a functional test.
9.7 Check safety equipment
Danger!
Running saw band may cause serious severance injury!
Only one person may check the machine's safety equipment.
How to check the main switch
1) Turn on the machine off with the main switch (see Chap. 7.3 on p. 33).
l
It should not be possible to activate the machine drives even when the safety push buttons
are active.
2) If the machine does not respond as described above when the main switch is deactivated, it is
not permissible to use the machine until this defect has been repaired by an electrician.
How to check the safety push button
1) Turn on the machine with the main switch (see Chap. 7.3 on p. 33).
2) Press and hold both push buttons at the handle.
l
Sawing begins.
3) Release the safety push buttons at the handle.
l
Sawing must stop immediately.
4) If sawing does not stop immediately or if sawing starts while the push buttons are not acti-
vated, turn off the machine with the main switch and contact the manufacturer's customer serv-
ice (see Chap. 8.5 on p. 46).
BSM 630