Ricoh WG-20, Руководство по эксплуатации

Страница: 99 / 288

97
3
Taking Pic
tures
You can use the remote control (optional) to take pictures while you are
away from the camera.
1
Press the four-way controller (
2
) in
A
mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (
45
) to select
i
and press
the four-way controller (
3
).
•
With
j
, you can continue shooting until the memory capacity
of the SD Memory Card or built-in memory is full.
•
The interval of
j
varies according to the [Recorded Pixels]
and [Quality Level] settings.
•
The focus, exposure and white balance are locked with the first shot.
•
When the Face Detection function is activated (p.71), it works only
when taking the first shot.
•
The Blink Detection function works only for the last shot.
•
The number of recorded pixels is fixed at
f
/ in
c
mode.
When the shooting mode is set to (Report), the number
of recorded pixels is set to
V
(1280×960).
Taking Pictures Using the Remote Control Unit
(Optional)
i
3-sec Remote
Control
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
h
0-sec Remote
Control
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
Four-way controller
4
button
Shutter release
button
WG20_OPM_ENG.book Page 97 Wednesday, February 5, 2014 2:20 PM