Ricoh WG-20, Руководство по эксплуатации

Страница: 102 / 288

100
3
Taking Pic
tures
6
Set the number of shots.
1
Press the four-way controller (
5
).
2
Use the four-way controller (
23
) to set [Number of Shots],
then press the four-way controller (
5
).
The frame returns to [Number of Shots].
7
Press the four-way controller (
3
).
The frame moves to [Start Delay].
8
Set the start delay.
1
Press the four-way controller (
5
).
2
Use the four-way controller (
23
) to set the hours, then press
the four-way controller (
5
).
3
Use the four-way controller (
23
) to set the minutes, then press
the four-way controller (
5
).
The frame returns to [Start Delay].
9
Press the
3
button.
The [Interval Shoot] settings are saved and the camera returns
to capture mode.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval shooting starts.
The LCD turns off between shots (during standby). Press the power
switch during standby to display the remaining number of shots and
interval on the monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the
3
button are pressed during standby.
Pressing the
4
button cancels interval shooting.
•
Interval Shoot is unavailable in
b
(Auto Picture),
9
(Green),
F
(Digital Panorama),
X
(Digital Wide),
S
(Fireworks)
and
O
(Voice Recording) modes.
•
Even if an alarm is set, the alarm will not ring during interval shooting.
•
Interval Shoot stops if the SD Memory Card is removed or inserted
during standby.
The Interval Shoot settings can also be configured from the [
A
Rec.
Mode] menu. (p.127)
WG20_OPM_ENG.book Page 100 Wednesday, February 5, 2014 2:20 PM