Ricoh WG-20, Руководство по эксплуатации

Страница: 49 / 288

47
1
Getting St
arted
If you accidentally select the wrong language and go to the next procedure,
perform the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (
5
).
2
Use the four-way controller (
2345
) to select the
language and press the
4
button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the
3
button.
This exits the settings screen and returns the camera to capture
mode.
2
Press the
3
button.
The [
A
Rec. Mode] menu appears.
3
Press the four-way controller (
5
).
4
Use the four-way controller (
32
) to select [Language/ ].
5
Press the four-way controller (
5
).
The [Language/ ] screen appears.
6
Use the four-way controller (
2345
) to select the language.
7
Press the
4
button.
The [
W
Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown],
[Date] and [Time], refer to the pages below for instructions.
•
To change [Hometown], follow the steps in “Setting the World Time”
(
1
p.221).
•
To change the date and time, follow the steps in “Changing the Date and
Time” (
1
p.217).
WG20_OPM_ENG.book Page 47 Wednesday, February 5, 2014 2:20 PM