Ricoh WG-20, Руководство по эксплуатации

Страница: 81 / 288

79
3
Taking Pic
tures
You can use the zoom to change the captured area.
1
Press the
w
/
x
button
in
A
mode.
w
Wide (left)
Widens the area that is
captured by the camera.
x
Tele (right)
Enlarges the subject.
If you continue to press
x
, the camera
automatically switches from Optical Zoom to Intelligent Zoom
and stops at the point where the zoom switches to Digital Zoom.
Once the button is released and pressed again, the camera switches
to digital zoom.
If the Digital Zoom is set to off on the menu, the Optical Zoom and the
Intelligent Zoom ranges are available for use. The zoom ratio of the
intelligent zoom changes depending on the number of recorded pixels.
The zoom bar is displayed as follows.
*1 You can zoom in to a maximum of 5× optically.
*2 The Intelligent Zoom range differs depending on the recorded
pixels. See the following table.
Using the Zoom
Four-way controller
4
button
3
button
w
/
x
button
38
33.5 33.5 33.5
Zoom bar
Zoom ratio
Zoom in with high image quality.
Zoom in with some degree
of image deterioration.
Optical zoom range*1 Intelligent
Zoom range*2
Digital
Zoom range
WG20_OPM_ENG.book Page 79 Wednesday, February 5, 2014 2:20 PM