Ricoh RDC-6000 страница 29 Скачать руководство пользователя

Страница: 29 / 125

Getting Started

Charging the Battery

When using for the first time and when the Battery mark (

) lights, use the AC

adapter and charge the battery.

Turn off the camera power.

Loading the Battery.

Connect the AC adapter cable to the (DC IN) jack of camera.

Insert the power plug into a power outlet.
The battery mark will appear on the LCD panel.

Note

• Following table is the explanation for each battery mark type. When charging

is completed, remove the power plug from the power outlet.

• Charging time for a full charge with an exhausted battery is approximately

3.5 hours.

• Battery mark is displayed in 5 steps depending on the remaining battery.

Using an AC Adapter

For extended recording and playback, connect the AC adapter and plug it into a power
outlet.

Important

Note

• Always read Safety Precautions in this manual before using the AC

adapter.

LCD panel

Explanation

display

The remaining battery comes close to be exhausted.
Charge the battery.

When the capacity display of the battery mark becomes
full, charging is completed. (full charge)

Содержание RDC-6000






























































































































Результаты поиска

Содержание RDC-6000

Отзывы:

Похожие инструкции для RDC-6000

Бренды по названию

Популярные бренды

Ricoh RDC-6000, Руководство по эксплуатации

Результаты поиска

Содержание RDC-6000

Отзывы:

Похожие инструкции для RDC-6000

Бренды по названию

Популярные бренды