Ricoh Network Scanning Unit A, Руководство по эксплуатации

Страница: 90 / 206

Configuring the Scanner Settings
82
3
HHHH
Press [ Settings ] .
The setting screen for “2. Original
Size” appears.
IIII
Select an original size.
• The option currently selected is
displayed first.
• The “*” mark appears along
with the option currently select-
ed.
• Use
[
↑↑↑↑
]
or
[
↓↓↓↓
]
to display the op-
tion you wish to select.
Note
❒
Pressing [ Cancel ] discards the
selected option, and returns to
the Default Print Settings menu.
To select an original size from
preset sizes
A
While the preset original size
you wish to select is displayed,
press
[ OK ] .
This saves the setting you have
selected, and returns to the De-
fault Print Settings menu.
Note
❒
Pressing
[ Exit ]
discards the
selected option, and returns
to the Default Print Settings
menu.
To set a custom size
A
While the option “Custom Size”
is displayed, press
[ Settings ] .
The setting screen for “Custom
Size” appears.
B
Use the
{{{{ 1 1 1 1 }}}}
or
{{{{ 0 0 0 0 }}}}
key to
highlight the item you wish to
enter, and then use the Num-
ber keys to enter the value.
Note
❒
To correct the number you
have entered, use the
{{{{ 1
1 1
1 }}}}
or
{{{{ 0 0 0 0 }}}}
key to highlight it, and
then press the
{{{{
Clear/Stop
}}}}
key to clear the number.
❒
You can also use the
{{{{
#
}}}}
key
as well as the
{{{{ 1 1 1 1 }}}}
and
{{{{ 0 0 0 0 }}}}
keys to move selection.
C
Press [ OK ] .
This saves the setting you have
entered, and returns to the De-
fault Print Settings menu.
Note
❒
Pressing
[ Cancel ]
discards the
values you have entered, and
returns to the Default Print
Settings menu.
JJJJ
Press [
↓↓↓↓
Next ] , and then select an
option for “3. Duplex” in the
same way you have done in the
steps
HHHH
through
IIII
.