Ricoh Network Scanning Unit A, Руководство по эксплуатации

Страница: 105 / 206

Configuring Settings Using a Web Browser
97
3
❖ ❖ ❖ ❖
E-mail
• E-mail Address
Enter an e-mail address used as the destination.
• Register as Sender
Select whether to use an e-mail address not only as a destination but as a
sender also.
• Sender's Password
Select whether to set a password for an e-mail address.
When
[ On ] is selected, a password is required when this e-mail address is
specified as a destination.
• Protected Password and Confirm Protected Password
Enter the password when
[ On ]
is selected for
[ Sender's Password ]
, using four
to eight digits.
Each password digit appears as “*.”
Information to register in [ Printer ]
You can register up to 99 printers.
Note
❒
You cannot select a paper tray to supply paper when performing a Print Scan
operation. To select a certain paper tray for the Print Scan, it is necessary to
register each of paper trays of a printer as an independent printer, by using
[ Configuration ]
→
[ Print Scan Settings ]
→
[ Printer ]
→
[ Add ] on the Web Status Monitor.
Reference
See the Web Status Monitor Help for information about how to register a printer.
❖
❖ ❖
❖
Program No.
Assign a program number to each of the printer registrations within the range
of 01 through 99. The smallest unused program number is automatically as-
signed when you register a new printer. You can also change the program
number manually.
❖
❖ ❖
❖
Printer Name
[ Printer Name ]
is used for recognizing each of the registered printers on the
Web Status Monitor when monitoring the printout jobs. Enter a printer name
within 80 characters.
❖ ❖ ❖ ❖
Key Display
Enter a name to appear on the control panel of this machine, using up to 16
characters. The first 16 characters of the printer name are automatically used
if you skip registering a key display name.
Important
❒
If you enter nothing into the
[ Key Display ]
box (by clearing the characters
that are automatically entered) and then press [ OK ] , the message “This pa-
rameter does not have any changes. Click [Back] to continue.” appears.
Never leave the
[ Key Display ] box empty.