Ricoh Network Scanning Unit A, Руководство по эксплуатации

Страница: 188 / 206

Appendix
180
11
PPPP
Turn off the power of this ma-
chine. Insert the wireless LAN
card to one of the PC Card slots on
the rear panel and then attach the
Wireless LAN Card cover.
Reference
See p.27 “Inserting a Wireless
LAN Card”
QQQQ
Turn on the powers of this ma-
chine.
RRRR
Start a Web browser on the client
c o m p u t e r , a n d e n t e r “ h t -
tp://192.168.1.2/” in the address
bar.
Reference
For details about the Web Sta-
tus Monitor, see p.84 “Access-
ing This Machine”.
SSSS
Click [ Configuration ] on the main
menu.
The password input dialog box
appears.
Note
❒
Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn’t
appear, proceed to step
U
.
TTTT
Enter “scanner” for the user name,
enter the password, and then click
[ OK ] .
Note
❒
User name is fixed to “scanner.”
❒
The initial factory default pass-
word is “password.” You can
change the password using
[ Configuration ]
→
[ Basic Settings ]
→
[ Password ] .
The setup screen appears.
UUUU
Click [ Basic Settings ] , and then
[ TCP/IP ]
on the sub-menu.
VVVV
Make settings to each of the setup
items on the screen.
Reference
See p.46 “System Settings”
❖ ❖ ❖ ❖
LAN Type
Switch between network inter-
face board and wireless LAN
(IEEE 802.11b) board. Be sure to
set this item to “IEEE 802.11b.”
❖ ❖ ❖ ❖
Network Boot
Select [ DHCP ] to use the DHCP
server to make network settings
automatically. When using DH-
C P, th e IP add ress, s ubnet
mask, and default gateway ad-
dress obtained from the DHCP
server are used.
Select
[ NONE ] to make network
settings manually.
❖ ❖ ❖ ❖
Communication Mode
S e l e c t t h e c o m m u n i c a t i o n
mode.
• Infrastructure mode
A method of communicating
with other client computers
via an access point. The SSID
must be the same as the one
set for the access point.
AHQ003S