Ricoh LDD250, Руководство по обслуживанию

Страница: 286 / 459

SERVICE PROGRAM MODE
C262/C265 5-26 SM
3. System Settings
No. Display No
.
Menu Function Default Setting
1 Serial Number -
6 Phone Number - Service
7 Phone Number - Supply
Order
8 Phone Number –
Business
9 Product Name - Master
10 Product Name – Ink
11 Date
12 Installation Date -
3-1 Installation
Setting
13 First Power On Date
Use these to input the
serial numbers, etc.
Do these at installation if
required. The data is
used in the data printout
mode in the system test.
(SP3-1-1 can be seen in
SP1-21-1. SP3-1-6 can
be seen in SP1-22-1.)
-
1 Set Job Separation Yes No/Yes
2 Set Key Counter No No/Yes
3 Optional Counter Type Set to Yes if installed.
0 0: None
1:
Add.card
2:
Sub.crd
3:
Prepaid
Card
4: Coin
Rack
4 Set Paper Delivery Table Japan only No No/Yes
5 Set Paper Feed Station No No/Yes
6 Set Sorter Japan only No No/Yes
7 Set Two-table Delivery
Unit
Japan only No No/Yes
10 Double Feed Sensor Set to ‘No’ if a
customer’s paper type
causes problems with
the double feed sensor. Yes No/Yes
11 LCIT Set to Yes if installed. No No/Yes
12 LCOT Set to Yes if installed. No No/Yes
13 Original Back Light Japan only No No/Yes
3-2 Unit Setting
14 Anti-Condensation
Heater
Japan only No No/Yes
3-4 1 Drum Screen
2 Paper Clamper Unit
PM Parts
Replacement
Record
3 Feed Pressure
4 Separation Pressure
5 Friction Pad A
6 Friction Pad B
7 Brush Velt.
See Note 1.
8 Bank Feed Pressure
9 Bank Separation
Pressure
10 Bank Friction Pad