Ricoh LDD250, Руководство по обслуживанию

Страница: 283 / 459

SERVICE PROGRAM MODE
SM 5-23 C262/C265
Service
Tables
6: 2-6-3 (A3 Master 2 Count Up)
0: The counters go up by 1 only.
1: The master counter goes up by 2.
2: The master and print counters both go up by 2.
Default: 0
7: 2-6-4 (Master Eject Attempt Number)
When the master eject mechanism cannot take the master off the drum, the
mechanism will try for the number of times set with this SP.
When the master is removed, the mechanism will stop.
Settings: 1 to 3
Default: 1
8: 2-6-5 (Auto Master Save Select)
Auto: If the original is A4 LEF or shorter, the master will be half-sized (A4 for an A3
drum). This decreases master consumption.
Fix A3 size: The master will always be A3 size.
9: 2-6-7 (Ink Supply Timing)
This mode determines when ink is detected and supplied. There are three possible
settings.
•
‘0: After’: Ink detection and supply are done when a print job finishes.
•
‘1: Before’: They are done when the Print Start key is pressed (and before
starting printing).
•
‘2: No’: Ink is not added except during normal printing.
NOTE: 1. If the machine detects a low ink condition during printing, ink is
supplied regardless of this setting.
2. To minimize the wait time for drum idling, ink supply prior to starting
printing has been eliminated by setting this mode to ‘0: After’ as the
default.
10: 2-6-8 (Ghost Image Removal)
This SP lets the user wrap a blank master around the drum. This should be done if
a drum will not be used for a long time. If a normal used master is used, the holes
in the master will let the ink become dry. Also, if the drum is removed, people can
see the content of the master.
To wrap a blank master around the drum, the user must press the “.” button and
the Start button together.